Non existing docker image for Lichee Pi Nano, linux doesnt compile, documentation broken


#1

Hello,
I spent over 8 hours trying to get started with Lichee Pi Nano without any success yet.
the image already flashed is loading however :
-there is no package manager
-SD card and UDisk doesnt mount nor even show in /dev
-wifi is not working with the “wifi” image, it took a lot of struggle just to get a connection
-documentation is missing or incorrect
(example sunxi-fel commands are wrong) http://nano.lichee.pro/step_by_step/two_sunxi-tools.html
-docker image does not exist anymore in the official depot, the baidu link doesnt exist anymore either
http://nano.lichee.pro/build_sys/docker.html
$ docker pull zepan/licheepi-nano
Using default tag: latest
Error response from daemon: manifest for zepan/licheepi-nano:latest not found
image
-instructions to build linux are not working :
http://nano.lichee.pro/step_by_step/four_linux.html
~/linux$ make ARCH=arm
./scripts/gcc-version.sh: line 26: gcc: command not found
./scripts/gcc-version.sh: line 27: gcc: command not found
make: gcc: Command not found
make: gcc: Command not found
HOSTCC scripts/basic/fixdep
/bin/sh: 1: gcc: not found
scripts/Makefile.host:102: recipe for target ‘scripts/basic/fixdep’ failed
make[2]: *** [scripts/basic/fixdep] Error 127
Makefile:449: recipe for target ‘scripts_basic’ failed
make[1]: *** [scripts_basic] Error 2
make: gcc: Command not found
SYSHDR arch/arm/include/generated/uapi/asm/unistd-common.h
SYSHDR arch/arm/include/generated/uapi/asm/unistd-oabi.h
SYSHDR arch/arm/include/generated/uapi/asm/unistd-eabi.h
make: *** No rule to make target ‘include/config/auto.conf’, needed by ‘include/config/kernel.release’. Stop.
-there is basically no support

Of course, F1C100S has small ram, it makes sense that there is no package manager, however since the stock image doesnt even have support for auto-mount of SD card, nor udisk and there is nothing installed to get SSH working, how are we intended to load any file on it or do anything useful? Also, since all the documetnation is either broken or missing, and no-one use this sunxi linux nor S1C100S SoC it start to become difficult to achieve anything useful.

Of course, it can be hard to offer support, but the minimum is to provide correct documentation and example, without broken links and non-working commands.


#2

hi, the development package is upload to http://dl.sipeed.com/LICHEE/Nano/SDK/nano_19_4.tar.gz
and now it is supported in linux 5.x, you can download kernel from mainline linux


#3

Hi,
This .tar.gz just fail to unpack, failed with te OSX utility, failed from command line.
Also, what i need is the OpenWRT port sources, because the image linked here https://pan.baidu.com/s/1smzuGS9#list/path=%2Fsharelink3658413294-628283680456500%2FLichee%20Nano%2F镜像&parentPath=%2Fsharelink3658413294-628283680456500
is 25mo and thus cannot be installed on the 16M flash.

**/Volumes/HD1/LICHEE_PI_NANO $** gunzip -c nano_19_4.tar.gz | tar xopf -

dev/agpgart: Can't create 'dev/agpgart'

dev/audio: Can't create 'dev/audio'

dev/audio1: Can't create 'dev/audio1'

dev/audio2: Can't create 'dev/audio2'

dev/audio3: Can't create 'dev/audio3'

dev/audioctl: Can't create 'dev/audioctl'

dev/dsp: Can't create 'dev/dsp'

dev/dsp1: Can't create 'dev/dsp1'

dev/dsp2: Can't create 'dev/dsp2'

dev/dsp3: Can't create 'dev/dsp3'

dev/full: Can't create 'dev/full'

dev/kmem: Can't create 'dev/kmem'

dev/loop0: Can't create 'dev/loop0'

dev/loop1: Can't create 'dev/loop1'

dev/loop2: Can't create 'dev/loop2'

dev/loop3: Can't create 'dev/loop3'

dev/loop4: Can't create 'dev/loop4'

dev/loop5: Can't create 'dev/loop5'

dev/loop6: Can't create 'dev/loop6'

dev/loop7: Can't create 'dev/loop7'

dev/mem: Can't create 'dev/mem'

dev/midi0: Can't create 'dev/midi0'

dev/midi00: Can't create 'dev/midi00'

dev/midi01: Can't create 'dev/midi01'

dev/midi02: Can't create 'dev/midi02'

dev/midi03: Can't create 'dev/midi03'

dev/midi1: Can't create 'dev/midi1'

dev/midi2: Can't create 'dev/midi2'

dev/midi3: Can't create 'dev/midi3'

dev/mixer: Can't create 'dev/mixer'

dev/mixer1: Can't create 'dev/mixer1'

dev/mixer2: Can't create 'dev/mixer2'

dev/mixer3: Can't create 'dev/mixer3'

dev/mpu401data: Can't create 'dev/mpu401data'

dev/mpu401stat: Can't create 'dev/mpu401stat'

dev/null: Can't create 'dev/null'

dev/port: Can't create 'dev/port'

dev/ram0: Can't create 'dev/ram0'

dev/ram1: Can't create 'dev/ram1'

dev/ram10: Can't create 'dev/ram10'

dev/ram11: Can't create 'dev/ram11'

dev/ram12: Can't create 'dev/ram12'

dev/ram13: Can't create 'dev/ram13'

dev/ram14: Can't create 'dev/ram14'

dev/ram15: Can't create 'dev/ram15'

dev/ram16: Can't create 'dev/ram16'

dev/ram2: Can't create 'dev/ram2'

dev/ram3: Can't create 'dev/ram3'

dev/ram4: Can't create 'dev/ram4'

dev/ram5: Can't create 'dev/ram5'

dev/ram6: Can't create 'dev/ram6'

dev/ram7: Can't create 'dev/ram7'

dev/ram8: Can't create 'dev/ram8'

dev/ram9: Can't create 'dev/ram9'

dev/random: Can't create 'dev/random'

dev/rmidi0: Can't create 'dev/rmidi0'

dev/rmidi1: Can't create 'dev/rmidi1'

dev/rmidi2: Can't create 'dev/rmidi2'

dev/rmidi3: Can't create 'dev/rmidi3'

dev/sequencer: Can't create 'dev/sequencer'

dev/smpte0: Can't create 'dev/smpte0'

dev/smpte1: Can't create 'dev/smpte1'

dev/smpte2: Can't create 'dev/smpte2'

dev/smpte3: Can't create 'dev/smpte3'

dev/sndstat: Can't create 'dev/sndstat'

dev/tty: Can't create 'dev/tty'

dev/tty0: Can't create 'dev/tty0'

dev/tty1: Can't create 'dev/tty1'

dev/tty2: Can't create 'dev/tty2'

dev/tty3: Can't create 'dev/tty3'

dev/tty4: Can't create 'dev/tty4'

dev/tty5: Can't create 'dev/tty5'

dev/tty6: Can't create 'dev/tty6'

dev/tty7: Can't create 'dev/tty7'

dev/tty8: Can't create 'dev/tty8'

dev/tty9: Can't create 'dev/tty9'

dev/urandom: Can't create 'dev/urandom'

dev/zero: Can't create 'dev/zero'

tar: Ignoring malformed pax extended attribute

tar: Error exit delayed from previous errors.