MaixHub Machine ID Generate Step(MAIXHUB机器码生成步骤)


#1

When you reach download page of MaixHub, It requires Machine ID:

You need download the ID generator firmware below:
key_gen_v1.2.zip (41.1 KB)

Warning : consider for encryption, key_gen.bin will close JTAG port FOREVER, and write one-off AES KEY, please accept it and then burn it

Then, reboot the board, you will see the Machine ID output from serial.
Now copy and input code to the page, click download, and you will soon get your firmware download.
(We also will send firmware to your account’s email address in the future)

Note: Must upgrade to newest maixpy to use its model: http://dl.sipeed.com/MAIX/MaixPy/release/master/
(先下上面的key_gen烧录,获得ID,然后再使用最新的maixpy固件进行模型测试)